2025-11-30

– Updating this firmware will disable the remote control function. Please manually access the remote control configuration page to enable the remote control function.
– The second remote control support has been added. You need to switch the used remote control in the ‘Infrared Remote Control’ page. The remote control function is defaultly disabled.
– On the ‘Interface Input’ page, adjust the interaction logic of the USB camera part and make the style of this page more unified with other pages.
– In the extended function, a new ‘Serial Port Control’ page has been added. This page allows using serial port to operate the device.
– In the extended function, the original ‘Serial Port/Buttons’ page has been renamed to ‘Serial Port Transmission’ to better match the page function.
– The ‘Automatic Carousel’ page has been moved to the extended function section.
– The problem of frequent insertion and removal of the device input interface possibly causing an increase in memory usage has been optimized.
– The noise reduction effect of the ‘Line Input’ has been optimized.
– The stability of the device receiving SRT streams has been optimized.
– The issue of AAC audio encoding with extensions not being able to be decoded normally has been corrected.
– The problem of not being effective when decoding NDI streams using the buffering mode has been corrected.
– The issue of abnormal loading of the WeChat mini program has been corrected.
– All models support IPv6 addresses.

2025-8-31

– Fixed the issue where the remote control does not trigger on ENCS1 models.
– Fixed the problem of abnormal SDI output for some resolutions on ENC4S models.
– Optimized the stability of synchronizing system time via NTP.
– Optimized the connection stability of the national standard GB28181 platform.
– Optimized the preview of H265 encoded video streams on the ‘Stream’ page.
– Added RIST protocol stream output on the ‘Stream’ page.
– Added the “Video Carousel” page, supporting automatic carousel of single and multiple screens (this function is not supported on MINI models).
– Upgraded the system RPC service.

2025-6-30

– The stability of Wi-Fi network card usage for ENC5V2, ENC2V3, and ENC8 has been optimized.
– The issue where the RTSP stream of the channel cannot be obtained through ONVIF when the encoding resolution is set to ‘auto’ has been corrected.
– The audio anomaly problem of the second HDMI output port of the MiniEnc1 model has been fixed.
– The problem of low volume of Line Output output on the MiniEnc1 model has been corrected.
– The issue of the USB camera not being able to collect sound on the ENC1Pro model has been fixed.
– The problem of the ‘Skinning’ page not working in the experimental function of the ENC1Pro model has been corrected.
– The issue where the HDMI output switching of the DEC2 model does not take effect after the audio and video sources are changed has been corrected.
– The issue where the ‘Remote Access’ page cannot be loaded after restoring the factory settings has been corrected.
– A new ‘Input’ page has been added, which includes control for HDMI/SDI/VGA, USB, LineIn. The LineIn has added noise reduction and gain control.
– The ‘USB Camera’ page in the laboratory has been removed. The function of this page has been integrated into the ‘Input’ page.
– The video parameter tab in the ‘Encode’ page has been removed. This tab’s function has been integrated into the ‘Interface Input’ page and the Rotation and Crop’ tab under the ‘Decode’ page.
– The Line In audio in the Mix channel has been removed.
– A new ‘Push’ interaction logic has been added, supporting specifying the audio and video sources for each streaming channel.

2025-4-30

– Fix the mismatch between scanned NDI stream and device IP
– Remove the invalid network port display on the ENC2V2 model page
– The default EDID of ENC8 and ENCMini models is changed to 1080
– Fixed the issue that the timing switch push flow did not work
– Fixed the issue that remote assistance could not be enabled on ENCMini models
– Fixed ssh failure on ENCMini models
– New mac address management mechanism
– Stream output page, rtsp TAB added custom channel to open Onvif output function
– Optimized memory footprint for ENCMini models
– Optimize Onvif output function
Optimize the WebRTC protocol flow
– Optimize the stability of connecting to the TallyArbiter service
– Optimize equipment startup speed

2024-12-31

– Laboratory added system log function, support to view/download system operation log
– Interface Output page added Line Output control
– Coding Settings page, audio coding added AAC-HE coding
– File recording page added loop recording, segment recording, boot recording and other functions
– Fixed audio mp3 encoding does not work
– Optimize the scaling and performance of the watermark effect
– Modify part of the page text description